Akytoji piezokeramika, kurios akytu

Akytoji piezokeramika, kurios akytumas yra nuo 25 iki 95% ir didesnis yra gaminama sukepinant PZT ir gliukozės mišinį. Skystėdama gliukozė išsipučia, todėl galima gauti labai akytą (iki 95%), keramiką. Jos struktūra panaši į kempinę. Akytumas neturi didelės įtakos pjezoelektrinio koeficiento d33 vertei, kuri mažo akytumo keramikai yra truputi mažesnė , o akytai keramikai yra labai panaši kaip PZT keramikai. Elektromechaninio ryšio koeficientas plokštumos atžvilgiu kp didėja, o storio atžvilgiu kt mažėja didėjant keramikos akytumui. Gauti pjezoelektrinių savybių matavimo rezultatai rodo, kad keramikos akytumas išskiria pjezoelektrinį efektą ašine ir radialine bandinio kryptimi, sustiprindamas jį ašine kryptimi. Keitiklis, pagamintas iš labai akytos keramikos virpa tik ašine kryptimi Įterpus polimerą akytosios keramikos dielektrinės ir pjezoelektrinės savybės pablogėja, dielektriniai nuostoliai padidėja, o pjezoelektrinis koeficientas d33 sumažėja.

ผลลัพธ์ (อังกฤษ) 1:

Cellular piezokeramika that porosity is from 25 to 95% and above are produced by sintering a mixture of PZT and glucose. Skystėdama glucose swells, so you can get a very porous (up to 95%), ceramics. Its structure is similar to a sponge. Porosity does not have a significant impact on the value of the pjezoelektrinio coefficient d33, which low porosity ceramics is slightly less, and the ceramics akytai is very similar to PZT ceramics. Elektromechaninio connection factor with respect to the plane of the kp is increasing, and in relation to others is decreasing with increasing thickness of ceramics from. Get the properties of the piezoelectric measurement results show that the effect of porosity of ceramic pulls pjezoelektrinį and the radial direction of the sample MS, strengthening it in the direction of Ms. The converter produced by very porous ceramic Insert in the direction of Ms polymer virpa only cellular ceramic dielectric and dielectric loss pjezoelektrinės properties deteriorate, rises, and piezo-electric rate reduction d33.

ผลลัพธ์ (อังกฤษ) 2:

Cellular piezokeramika with porosity of 25 to 95% and over is produced by sintering the PZT and glucose mixture. Skystėdama glucose swells, so one can get extremely porous (up to 95%) and ceramics. Its structure is similar to a sponge. Porosity does not have a significant impact on the value of the piezoelectric coefficient D33, which is a low porosity ceramic is slightly lower and porous ceramic is very similar to that of PZT ceramics. Electromechanical communication factor plane CP increases and others in relation to the thickness of the ceramic decreases with increasing porosity. Get piezoelectric properties measurements indicate that the porosity of the ceramic piezo-set in axial and radial direction of the sample by strengthening it in the axial direction. The converter is made of a porous ceramic is oscillating only in the axial direction of insertion of the polymer porous ceramics dielectric and piezoelectric properties declines, dielectric loss increases, and the piezoelectric coefficient D33 is decreased.